With a vast industry experience we bring to our clients a wide range of Sprinklers/Sprayers - Fire Fighting Equipments as a mean of fire protection. These sprinklers are installed exclusively for the protection of commercial buildings, to enable to recoup their expenses with savings in insurance costs.
|Alarm Sensor Type||Smoking Sensor|
|Power||24 V DC|
Aesthetically pleasing low profile design
8 bit intelligent processor with A/D converter
Built in algorithm maps for false alarm rejection
Twin LED for 360 degree vision
Sensitivity adjustable via hand held programming tool
Removable optical chamber for easy cleaning and maintenance
Operating voltage: Loop 16V- 28V
Standby current: 0.8mA
Alarm current: 2mA
Temperature: -10C to + 50C
Relative humidity: 95%
Dimensions: Diameter: 100mm Height: 42mm(without base)
Light Weight / Easy Handling
Long Range Jet and Fog Pattern
Option of Fixed / Spinning Teeth
Select Flow Facility
Very Low Maintenance
Low and medium expansion foam attachment available
Made of aluminum alloy hard anodised.
Prices available on demand.
Metal : Gun Metal
Size : 2½" (63 mm), Other size can be available on demand.
Outlet : Jet and Spray.
Type of Connection (Inlet) : Instantaneous, Screwed, Nunan, Storze (Male).
Hydrostatic Pressure for Body : 21kgf / cm2.
Finish Body : Buff Polished / Chrome plated.
Guarantee: One year from the date of purchase for any manufacturing defect.
Compatibility with all conventional fire control panel.
Alarm test key facilities.
24V DC (12-30V) with reverse polarity operation
22 mA @ 24V
100 db +/- 5 db
81.5 x 81.5 x 32 mm
Fire Alarm in new attractive look.
Different colors are available.
Different tones are available.
Connector is plug in type.
Suitable for Malls, Restaurant, Bank etc.
Conformity Codes to Standards :
Design & face to face dimensions : API 6D / ANSI B16.10
Valve testing : API 598
Flange standard conformity : ANSI 150, DIN PN 10 & PN 16, BS 10 Table D & E
Technical Specification :
Valve type : Self acting non-return valve.
Description : Single plate wafer type swing check valve.
Body type : Short pattern wafer type
Disc type : With integral hinge pin
Model nomenclature : IVC- check valve with rubber O-ring seat and face sealing
IVCT- check valve with PTFE seat and serrated contact faces
Size range : 25 NB to 600 NB
Pressure rating : PN 16 (max)
Operating temperature range : -250 C to 2000 C (depending on MOC)
Seat leakage : Zero leak / tight shut off
Standard Material of Construction (MOC)
Body : SGI /WCB/ CF8/ CF8M/CS-IS 2062
Disc : SGI /WCB/CF8/CF8M
Seat : EPDM / Viton/ Nitrile/ Neoprene / Hypalon - for IVC, PTFE or GFT -for IVCT
Key Features :
Very low face to face dimensions hence space required for mounting is less than 10% of that conventional valves.
Very low weight-total weight is only approximately 1/6 the weight of a conventional check valve.
Short wafer body enables mounting the valve with shorter length fasteners of lesser number compared to flanged swing check valve. Approximately 50% saving in cost of fasteners.
Considerable secondary advantages resulting in substantial savings in handling, packing, transportation, installation and maintenance.
Saving in terms of overall length required for piping.
Tightening torque to be applied on the companion flange bolting is lower due to face sealing O-rings.
Practically maintenance free due to fewer number of parts and simple construction.
Self centering in pipeline due to controlled outside diameter, enables easy installation.