We extensively provide highly operational range of Conventional Fire Detection Systems. These conventional systems provide a reliable and cost effective solution to early fire detection, for small to large size installations. These are available in various specifications to choose from.
|Size||2 1/2 Inch|
Flange Details (Inlet)
Size of Hydrant Valve
|Wheel Material||Cast Iron|
Size: 2½” (63 mm)
IS Code: IS 5290 type B (If applicable)
Material of Construction:
Body: Gun Metal (Also available in Aluminium / Stainless Steel / Cast Iron - Select from below)
Male Blank Cap: PVC
Wheel: Cast Iron
Hydrostatic Test Hydrostatic Pressure 21kg. / cm2
Water Tightness for seat 14 Kg. / cm2
Body Painted Red
CI Wheel Painted Black
Parts Buff Polished
Guarantee For the period of 12 Months from the date of Supply.
Flange Details (Inlet)
Size of Hydrant Valve
A clean synthetic smoke aerosol delivering particles to replicate those found in real smoke.
Plastic compatibility checked
Faster response / clearing times
Suitable for detectors of different types and makes
Designed to be used with the Solo 330 Smoke Dispenser
The professional's choice for ultimate value.
Too many test aerosols in today's fire detection market have not been fully researched and, as a result, can cause problems such as
stress-cracking in detectors.
Only Solo Detector Tester has these built-in features:
Solo Aerosol is engineered for optimum performance with the
lightweight Solo 330 Smoke Dispenser.
Conventional Manual Call Points
Conforming to Australian Standard 2792-92,Candian Standard ULC-S519.1-95, New Zealand Standard (NRFA) 1998, IS 8423.
IS : 8423
Controlled Percolating hoses
Made from synthetic Yarn for extra strength
Prices of other sizes are available on demand.
SS Inline Inductor 80 mm N.B. flanged inlet
Material : Gunmetal
Inlet : Female Round Threaded
Outlet : Male Instanteneous
Inlet : 75mm (3"), 100mm (4"), 137mm (5½") Threaded
Outlet : 63mm (2½") Male instantaneous
Finish : Buff Polished
Guarantee : For the period of 12 Months from the date of supply.
Addressable Manual Call Point (MCP) with re-settable (non breaking) glass
Additional volt free contacts for local interfacing (i.e. PTZ camera preset)
Two part plug-in construction with base mounted termination allows for easy installation and connection
MCP can be addressed and plugged in to base at time of commissioning.
Suitable for semi-flush and surface mount installation
Operating voltage: Loop 16V-28V
Monitoring current: 0.8mA
Alarm current: 2mA
N/O output contact: rated 60VDC, 0.1A
Contact resistance 100ml¸
Temperature: -10C to + 50C
Relative humidity: 95%
Dimensions: 90mm x 122mm x 48.5mm
Interfacing security detectors
12VDC/200mA power output
Two part plug-in construction with base mounted termination allows easy installation and connection
Modular design, plugin type solid state.
Gold plated finge type PCBS.
Expandable up to 2 to 50 fire alarm panel.
Each zone with fire, open, short indication and sound.
Associate with P.A. system, talk back system, Auto dialer etc.
Battery charger and battery box faciity.
Mains, AC Fail, rev. battery, fuseblown, fault isolate indication.
Compatible with any smpke and heat sensor.
ERTL tested as per IS : 2189.
230 V. AC/24 V. DC
No. of Zone
2 to 50 zone
End of Line
10 Watt / 200 Watt (Normal/Fire)
Weight (without Batt.)
10” x 4” x 2.5”
24 V DC
24 V DC
System Sensor Make Fix Temp. Heat Detector.
The Linear Heat Sensing cable is a flexible, durable and cost-effective fixed-temperature fire detector, suitable for protecting a wide range of commercial and industrial fire applications.The Linear Heat Sensing Cable is designed to provide early detection of fire conditions and overheating in circumstances where other forms of detection would not be viable, either due to inability to sustain the environmental requirements or through prohibitive costs with wide variety of applications like open area protection, Cable Trays, Rack Storage, Belt Conveyors, Power Distribution Apparatus, Cooling Towers, Escalators, Freezer Warehouses and many other harsh environments
System Sensor Linear Heat Sensing Cable offers the complete solution by providing early detection of fire or overheating conditions by detecting changes in temperature with two different variants.
800 Conventional Series – Digital Linear Heat Sensing Cable. A "switching " cable where a change in state of internal insulation - caused by temperature rise to a pre-defined level - allows a short circuit or "hot junction" to occur between two twisted tin plated copper conductors.
900 Intelligent Series – Analogue Linear Heat Sensing Cable. A multi-conductor or co-axial cable which exerts a defined change in electrical resistance of internal polymers when subjected to changes in ambient/surface temperatures. System monitoring through an associated PC Modulator unit provides fault indication of open and short circuit conditions on the sensor cable.
Features of PC Modulator
Comprises of signal process unit which consists of signal collection, amplification and conversion.
Customizable pre – alarm and fire – alarm temperature thresholds.
Capable of reliable fault monitoring regardless of open or short circuit.
LED indicates normal system operation, faults, pre-alarm and fire- alarm status.
Automatically reset after alarming.
Metal : GM
Size : 13mm (½") , 25mm (1")
Type of Connection : Threaded.
Hydrostatic Pressure for Body : 21kgf / cm2
Finish Body : Chrome Plated/ Buff Polished
Guarantee : One year from the date of purchase for any manufacturing defect.
Φ mm Size
Hole Φ mm
No of Hole
100 (4 inch)
Prices and specification are available on demand.
Single loop mini panel
Can connect up to 128 addressable devises
8 zones indication
Self configurable via panel keyboard
Optional panel printer
Fire and fault relay output
1 bell circuit
Easy commissioning making the GST100 an ideal product for electrical installers
Power supply: 230VAC 50/60Hz
Relative humidity: 95%
Dimensions (L x W x H): 210mm,91mm,300mm
Fast application of water in spray, pre-action and foam system
Size: 50, 80, 100, 150 & 200 mm. (2", 3", 4", 6" & 8")
Cast iron body & cover- Maximum service pressure 12 bar (175 psi)
Bronze clapper and seat
Flanged connection dimensions to ANSI B 16.1
No latch, no piston, no hinges
Simple yet rugged
Diaphragm operated with rubber to metal drip-tight positive sealing
Reset without any tools
Service without removal from line
Easily trimmed for actuation by manual, remote solenoid valve & with dry or wet pilot
Internal and external surfaces epoxy coated for extra protection
Available as pre- assembled cabinet/skid mounted, upon request
Technical Data :
Frame : Brass
Sealing Button : Bronze/Teflont
Ejection spring : Stainless Steel
Fusible element : Solder, Copper, Stainless Steel
Strut : Monel
Hook : Bronze/Monel
Maximum working Pressure : 175 psi
Discharge coefficient :
K=5.6 GPM/psi1/2 (80.6 LPM/bar1/2)
K=8.0 GPM/psi1/2(115.2 LPM/bar1/2)
Finishing : White coated, Chrome plated and Brass plated
Color coding for liquid inside bulb
Color of liquid
Approval : UL and C-UL listed, FM and LPCB approved
A similar technology is adopted for Foot Valves and yet another Patent was awarded. The frequent priming of pumps is now eliminated with these Foot Valves. Ball type valves cover wide range of applications like slurry, sewage, paper, chemicals in addition to agriculture.
Works excellently in muddy/clear water, viscous liquid, paper stock, slurries
Manual Fire Alarm and Pump Trigger System