Clients can avail from us cost effective and highly operational Clean Agent Fire Protection Systems for household usage. These specially built fire suppression systems are made of superior quality and sophisticated material. These systems may also be safely used on electrical equipments and other valuable items and don’t damage the valuable.
|Capacity||3Kg, 4Kg, 4.5Kg, 2Kg, 5Kg|
|Area Protection||1 to 1.5 m square|
|Working Pressure||7 - 15 Kg per cm2|
System Sensor Make Optical Smoke Detector With Base B-401
12/24 VDC nominal
10-100mA (must be limited by control panel)
3.5 inch Octagon:
4 inch Octagon:
4 inch Square:
Dual ionization smoke sensing chamber - Early detection of fast burning fires such as gasoline, cooking grease and paper
Installation design and features similar to other Firex smoke alarms - Contractor familiarity with installation
Lighted Power/Alarm LED
Confirms unit is receiving power Incorporates Firex installer focused innovations
Fastest and easiest installation available Factory sealed housing
Prevents tampering and provides outstanding durability
The smoke alarm shall be a Styleline designTM (1-1/8" high, 4" wide), powered by a 9 V DC, battery power source and a dual ionization sensing chamber and sealed housing with a separate metal mounting bracket.
The alarm shall produce two short chirps approximately 2 seconds apart at the conclusion of the desensitized period.
Norninal sensitivity shall be measured by U.L. at obs. 1.1 + 0.47%ft. and by U.L.C. at 1.1%,
Temperature operating range shall be between 40° and 100° F(4 - 38 C);
humidity range between 10% - 93% relative humidity
100% solid state alarm circuits over an input range of 7-10 V DC.
A power on indicator shall be a built-in light emitting diode which "blinks" once per minute in the standby condition.
A 30 day low battery signal shall be included for added safety.
The test switch shall electronically activate the chamber to simulate smoke and check for proper operation.
The electronic horn shall have a level of 85 decibels at 10 feet
The 462 shall meet the requirements of U.L. Standard 217.
Indfos RT Series Pressure switch is produced using technology provided by Danfoss Denmark. These Switches are sturdy, robust and reliable devices meant for Industrial applications. Over one million units have been used in a variety of applications.
RT Series pressure switches utilize a seamless bellows as sensing element. The bellows can be either phosphor bronze or stainless steel to suit various kinds of process medium. The mechanism is enclosed in a weather proof (IP66) enclosure which can be of either DMC or Die Cast Aluminium. Various kinds of switching elements can be provided to meet required electrical load specifications. Both Range and Differential can be independently adjusted. All models feature ± 1% repeatability and device has clearly read setting scale.
Face-to-face dimensions for flanged globe valves conform to ANSI B16. 10.
End flange dimensions and drilling conform to ANSI B16.1. end flanges are fully flat faced and smooth finished on the joint side in accordance with MSS Sp-6.
Discs in sizes 2" and 2½" are constructed of solid cast bronze as shown in Figure1.
disc in sizes 10" and 12" are provided with disc guide pins to ensure accurate disc alignment.
Pressure-temperature ratings conform to those in MSS SP-71.
For sizes 4" and larger, by-pass bosses are provided at A, B, E and positions in accordance with MSS SP-45
Confirmity to codes and standards:
General design and manufacturing : API 609 category A/BS 5155/MSS SP-67
Valve face to face dimensions : Short wafer as per ISO 5752 Tab 5/API 609 category A
Top flange drilling : ISO 5211 part II
Valve inspection and testing : API 598
Flange standard conformity : ANSI 150 , DIN PN6/10, JIS 5K/ 10K BS10 Tab D & E, IS 6392 NP 0.6 / 1.0
Techinical Specification :
Valve type : Centric Disc Butterfly valve with a single piece Rubber lined body
Body type : Short wafer (sandwiched between flanges)
Seat type : Integrally moulded with the body.
End Connection : Wafer Sandwiched
Size range : 40 NB to 300 NB
Pressure rating : PN 10 ( max ) : Operating temperature range : -250 C to 1300 C (depending on MOC)
Seat leakage : Tight shut off
Handlever for sizes from 40 NB to 250 NB
Worm gear boxes for 40 NB to 300 NB.
Standard Material of Construction (MOC):
Body : CI
Disc : SGI / CF8
Seat : EPDM / Nitrile
Shaft : AISI 410
Integrally molded seat liner on the body, which ensures excellent dimensional stability & guaranteed seat tightness.
Seat liner extending on to the contact faces ensures perfect sealing and eliminates the need for separate flange gaskets.
Unique triple sealing system for shaft sealing ensures zero leakage of the media past the shaft seals.
Narrow land disc ensures perfect sealing with least operating torque requirements.
A fully universal body design ensures fitment of the valve between companion flanges of all popular standards (viz: ANSI, BS, DIN, JIS, IS etc )
A ten position notch disc and handlever ensures locking of the valve in 8 intermediate position in addition to closed and open position. Handlever lockable through pad lock for tamper proof positioning.
Body castings made of superior FG 260 grade cast iron to ensure additional strength.
Valve disc made of ductile cast iron instead of cast iron to withstand against possible water hammer or pressure surges.
A truly line size body bore to ensure maximum flow capacity with the lowest pressure drop.
Shafts made of martensitic stainless steel to ensure maximum strength and torsional rigidity.
Both top and bottom shaft swiveling are guided by self - lubricated PTFE bearings.
Fool proof handlever designed to prevent accidental pinching of hand between the handle and locking lever.
3 Loop Addressable Networkable (Expandable To 12 Loop)
Modular construction and distributed intelligence allow systems of up to 96 loops to be constructed. with a high level of built in redundancy and emergency back features the Juno-Net is fully equipped to control the most complex installations. using its wide array of interfacing capabilities the Juno-net is ideally equipped to control the most complex installations. Using its wide array of interfacing capabilities the Juno-Net is ideally placed to provide an effective solution to the logistics of protecting large institutions, universities, airports, industrial complexes etc. may have many individual fire alarm system but require central reporting and control can easily be accommodated by the advanced capabilities of the Juno-Net.
Flexible sprinkler tube enhances efficiancy by 50%-70% and is the best technologies method. The sizes Fare various and can be connected and worked by inexperiances workers, allowing great cost saving. The sprinkler tubes can replace the existing branch pipe section that is from the pipe to the sprinkler tube, enabling easy and conveniant installations.
efficiency: even the inexperience workers can install easily and conveniently.
more speed job.
safety: unlike the previous pipe fitting. It is a new developed system and inspect and check the safety by testinf the water leakage test for each set.
convenient: the installation is convenient by flexible joint in the place where thee are not enough space.
by the flexible tube, the location will be easily changed to match the position of the sprinkler.
0. 00 kg.
Manual Call points are used to trigger the alarm manually and when activated, initiates an alarm on a fire alarm system. The Airtight Manual Call points is Switch Operated and this eliminates the replacement of glass and therefore reduces maintenance costs.In addition the call points include a number of features designed to make installation quick and easy.